Mud Gas Separator/Poor Boy Degasser for oil drilling fluid H2S remove

Mud Gas Separator/Poor Boy Degasser for oil drilling fluid H2S remove

Item No.: mud gas separator

Material: 12mm thickness vessel plate, high pressure
Min. order: 1 set
Pipes： contain with poor boy degasser
Payment: T/T, L/C, Western Union

INQUIRY

Description

Brief Introduction
One drilling site must has one set mud gas separator. The drilling fluid from well contain big bubbles, so firstly it is taken into the mud gas separator. Inner of the mud gas separator has many inclined plates, the drilling fluid with bubbles will knock the plate and then the bubbles are broken, so the gas was released and discharged from gas line. The gas line is connected with flare ignition device, the gas will be burned.

Model and Parameters

Model	FLQ800	FLQ1000	FCQ1200
Vessel diameter	Ø800mm	Ø100mm	Ø1200mm
Treating capacity	240m3/h	300m3/h	380m3/h
Feed inlet pipe size	5"	5"	5"
Fluid discharge pipe size	8"	10"	10"
Vent line diameter	8"	8"	8"
Weight	1650kg	2000kg	3200kg
Dimension (LWH)	1900×1900×5700mm	2000×2000×5860mm	2200×2200×6634mm

Package and Delivery
The mud gas separator is big and high, so usually it is packaged with plastic foam, and delivery by bulk cargo ship.

Mud Gas Separator/Poor Boy Degasser for oil drilling fluid H2S remove

Review